Material differences:

　　In terms of materials, the in**x type inflatable boats on taobao are generally made of PVC or plastic materials with a thickness of about 0.4mm, which is relatively thin and designed as a single air chamber. That is to say, there are only one or two air Chambers. Professional rubber boats are all made of professional inflatable boats: Import PVC material, the thickness of 0.9 mm, with 1100 d strength of fibres in materials, the equivalent of two layer between a layer of strength of fibres PVC material, can increase the tensile and impact resistance, and add in the PVC material with uv protection of raw material, under the sunlight for a long time without deformation or cracking leakage, and the PVC material has replaced the traditional pure rubber material, become the mainstream of inflatable boat materials today.

　　Professional PVC rubber boats are all designed with multiple air Chambers, that is to say, there are 3-6 air holes on a boat, and the corresponding buoyancy can still be maintained in the case of air leakage in one of the air Chambers, so the design of multiple air Chambers will make the crew safer.

　　Differences of components:

　　Compared with in**x rubber dinghy, professional PVC rubber dinghy has stronger paddles and thicker aluminum alloy material, which can be used for a long time without breaking or cracking. Commonly used parts such as the lock of the paddle are in the form of plastic and metal buckle, so that the production process can ensure that in the process of often sliding will not be damaged because of excessive force.

　　Weight difference:

　　Actually judge of a boat just ask sellers boat will know that the weight of the professional rubber boats 2.5 meters must be more than 30 kilograms of weight, if it is in the inflatable boat weight of * * x class should be 10 kg more or less, and the price of professional PVC inflatable generally 2.5 meters price should be in more than 2000 pieces, if the price is too low you will pay attention to whether there is a problem.

　　Suspension power difference:

　　Majority of inflatable boats in * * x class without a suspension dynamic tail plate, if you need to increase the electric or fuel outboard machine, need to buy another price of around 140-170 stainless steel tube hang tail plate, then please note that your machine weight not overweight, which means you can only choose 2 to 3 HP HP small machines, for about 3 meters length is generally in three to four people in * * x inflatable boat, this motivation is clearly not enough, but if you need more power suspension outboard machine, such as about 6 HP outboard machine, the power of machines generally in 20 kg weight, IN**x class inflatable boats are equipped with a stainless steel rear bracket that can't support such a large weight, which means the stern is bent and the engine will sink into the water.

　　Professional PVC rubber dinghy tail has professional hanging machine tail plate, tail plate thickness is generally 30-45 mm, such a thickness is enough to bear the weight of 23-50 kg of the ship, it is said that you will not because of the ship and restricted the power of the ship.

　　Price difference:

　　General * * x in a series of inflatable boats in a few hundred yuan, is the price of the professional PVC forming the inflatable boat cloth prices generally between 2000-5000 yuan, or there's a big difference, but if the average to every time the cost will be different, because the latter can be long-term use, without damage, the former majority is the life of 3 to 5 times.

　　Usage:

　　Hundreds of yuan inflatable boat most toys are swimming in the pool, the boat must not enter the natural waters, because of the hull and joints due to the disadvantages of hot melt process cannot bear too big splash or shock waves from outside force, it is easy to cause loss of pressure and material tear, this is a very dangerous thing in the rivers and lakes.